Waterproof Magnetic Gate THRUSCAN SX-WP

Extremely high-quality and reliable waterproof metal detector for both metal and non-metal objects considered dangerous by the International Security Organization, which are on a person being scanned. It detects all threat objects even hidden, camouflaged or wrapped. The very low frequency VLF technology it uses for detection makes it capable of satisfying demanding scanning uses. Ideal for pregnant women and people with pacemakers.

210 300 1190

19 People watching this product now!
SKU: THRUSCAN SX-WP Category:
Description

Description

Waterproof Magnetic Gate THRUSCAN SX-WP

  • International regulations (NILECJ-0601 L1-5/IP55/EN60950 Class 1) Complies with European Union CE regulations and is produced in accordance with ISO 9001:2008 QMS

    Certified according to regulations EN 61000-6-3, EN 61000-6-1 and according to DIRECTIVE 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment)
    IP 55 WEATHER RESISTANT – OUTDOOR OPERATION (EN 60529)
    Multi-Zone – 9 Panel Detection Zones (Top/Middle/Bottom and Left/Middle/Right)
    Separate zone sensitivity adjustment function
    During normal operation, it displays the ENTRY/EXIT counters and security level on a 64×128 graphic LCD screen without abbreviations, so that security personnel can easily understand.
    Capable of detecting ferrous and non-ferrous metal objects considered dangerous by international security authorities
    Can detect test objects both individually and in combination
    Displays the location of detected metal objects on both LEFT/RIGHT side panels from bottom to top with continuous LED zone indicators
    It detects all threatening objects, even hidden, camouflaged and/or wrapped. It is impossible for such threatening objects to pass through the WTMD without triggering an alarm.
    There is no interference between zones and no false alarms
    Homogeneous Magnetic Field – No Dead Spots – Same Detection Ability from Bottom to Top
    Detects metals regardless of their orientation 
    20 sensitivity levels, 246 adjustable sensitivity steps in each,
    NILECJ Standard preset sensitivity program, 7 preset international security programs
    Automatic frequency selection function
    The metal density-mass and signal strength indication on a 10-level VU meter with green, yellow and red LEDs allows for easy visibility from a distance.
    Automatic calibration (Automatically calibrates to ambient conditions) No setting changes required when moving and/or bringing new magnetic objects nearby
    Human health-friendly VLF very low frequency technology. Does not affect pacemakers, pregnant women and magnetic media.
    Green/red two-color LED traffic allows easy visibility from a distance of 60 people/minute
    Visual graphical representation of magnetic interference from the environment
    Adjustable audible alarm at 10 tones/level or silent mode (mute) and adjustable tone duration
    Reload factory settings with the push of a button
    Five-digit incoming counter (can be made invisible)
    IR protection function allowing perfect low false alarm operation/ Continuous detection mode option enabled
    Operation without interference from other electronic devices 
    Does not affect other electronic devices. Necessary filtering
    precautions have been taken
    Four-digit digital postal address code with changeability and mechanical lock for security
    Automatic fault indication with continuous self-checking of key parameters. (BITE – Built-in Test Equipment)
    Easy programming and visualization via high resolution GLCD (Graphic Liquid Crystal Display)
    4 Menu Languages, Standard menu in English, German, Spanish and Turkish
    Relay output for CCTV recording, photo taking, turnstile control, etc.
    Built-in uninterruptible power supply (UPS) that allows 2 hours of operation without power
    Battery on/off function allows operation without power
    Easy to install and assemble walk-through metal detector (15 minutes)
    Male/female socket connector design
    Built for 24/7 continuous operation
    Clear passage width 74 cm and clear passage height 200 cm
    Interference-free operation at medium-level sensitivity of 10 cm at a fixed distance from metals and 200 cm on moving metal objects
    Installation and operation without interference between two detectors at a distance of up to 5 cm
    Audio-visual alarms are audible at a distance of 4 meters
    Microprocessor settings do not change when there is a power failure
    The magnetic field within the entire transit area is 0.1 Gauss
    There is no interference with storage media, flash drives, CDs, floppy disks and other electronic devices
    All electronic units (electronic unit, power supply, battery, adapter, etc.) are located inside the Equipment. There are no external units.
    Corrosion-resistant metal floor mounting feet for proper assembly and durable use
    STANDARD ABS rain cover on top
    ABS protective footrests for increased protection and strong fixation
    OPTIONAL, SCADA software controlled, remote data communication and networking of multiple metal detectors. Change settings via software via PC. 
    OPTIONAL – IRDA – Remote control unit (Optional)
    Detection functions have been tested with ECAC/NIJ/TSA test kits and certified.
    Technical characteristics:
    • Ambient temperature:
    -20°C to +70°C
    •Operating voltage: 
    70VAC – 270VAC / 50Hz – 60Hz
    •Force:
    10W in standby mode – 20W (Alarm)
    Clear passage:
    740x680x2000
    Abroad:
    850x680x2200mm

    Packaging dimensions (W x L x H):
    Box 1: 
    81 x 235 x 21 cm. 
    Box 2: 
    43 x 81 x 27 cm. 
    Box 3:
    62 x 101 x 12 cm. 
    Gross weight:
    83 kilos
    Net weight:
    63 kilos
Payments & Shipping

Shipping costs:

Up to two kilos 5€ with a courier company

  • Upon consultation for products over 2 kg and for bulky parcels.

Free Shipping:

  • MOMO applies to purchases of digital products & services. 

Payments:

Direct bank deposit