Magnetic Gate – THRUSCAN S3

Description

Magnetic Gate – THRUSCAN S3

• It complies with European Standards and the NILECJ-0601.00 L1-5 Standard and is produced in accordance with the ISO 9001: 2008 QMS standard.

  Certified safe in terms of electromagnetic field-EMC, IP protection levels, international health and safety standards

  No setting changes are required for winter/summer seasonal adjustments

  Resistant to vibrations and impacts

  Capable of detecting ferrous and non-ferrous metal objects considered dangerous by international security authorities.

  It can detect test objects both individually and in combination.

  Raise an alarm on all threat objects detected in different Alarm Zones.

  It detects all threatening objects, even if they are hidden, camouflaged and/or wrapped. It is impossible for such threatening objects to pass through the WTMD without triggering an alarm.

  There is no interference between zones and no false alarms

  ThruScan/s3 Multi-Zone – 3 Detection Zones Vertically (Left/Middle/Right)

  ThruScan/s6 Multi-Zone – 6 Detection Zones Array (Top/Middle/Bottom and Left/Right)

  Homogeneous Magnetic Field – No Dead Spots – Same Detection Ability from Bottom to Top

  10 sensitivity levels, 246 adjustable sensitivity steps in each 1 standard preset international security program

  Automatic calibration (Automatically calibrates to ambient conditions) No setting changes required when moving and/or placing new magnetic objects nearby

  Human health-friendly VLF very low frequency technology. Does not affect pacemakers, pregnant women and magnetic media. Two-color green/red LED traffic allows easy visibility from a distance of 30 people/minute.

  Superior Distinctive, Accurate Target Position Recognition / Graphic Zone Display on Control Unit

  The metal density-mass and signal strength indication on a 10-level VU meter with green, yellow and red LEDs allows for easy visibility from a distance.

  Digital environmental magnetic noise level and visual detection and error code display on a wide 4×20 character LCD screen 

  Adjustable audible alarm at 10 tones/level or silent mode (mute).

  Five-digit incoming counter (can be made invisible)

  Separate alarm counter (5 digits)

  Infrared sensor on/off option

  Four-digit numeric postal address code with the ability to change

  Automatic fault indication with continuous self-checking of key parameters. (BITE – Built-in Test Equipment) 

  Reload factory settings with the push of a button

  Easy programming and monitoring with wide LCD screen

  4 Menu Languages, Standard menu in English, German, Spanish and Turkish

  OPTIONAL – Uninterruptible power supply (UPS) allowing 2 hours of operation without power

  No seasonal adjustment required thanks to the Digital Electronic System (DSP)

  Easy to install and assemble plug-in metal detector (15 minutes) with male/female socket-connector design

  Protection level IP 20 – IP 65 Optional (EN 60529)

  Built for 24/7 continuous operation

  Clear passage width 74 cm and clear passage height 200 cm

  Interference-free operation at medium-level sensitivity of 10 cm at a fixed distance from metals and 200 cm on moving metal objects

  Audio-visual alarms are audible from 2 meters away – Microprocessor settings do not change when there is a power outage

  Corrosion-resistant metal floor mounting feet for proper assembly and durable use.

  According to the CE standard, Certified according to regulations EN 61000-6-3, EN 61000-6-1 and according to DIRECTIVE 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment) 

  Technical characteristics:
  

  Ambient temperature:
  -20°C to +70°C

  Operating voltage:
  70VAC – 270VAC / 50Hz – 60Hz

  Force:
  10W Standby – 20W (Alarm)

  Clear passage:
  740x680x2000

  Abroad:
  850x680x2200mm

   

  Packaging dimensions (W x L x H):

  Box 1: 
  81 x 235 x 21 cm. 

  Box 2: 
  25 x 80 x 27 cm. 

  Gross weight:

  77 kilos

  Net weight:
  58 kilos