Magnetic Gate – THRUSCAN SX

Description

Magnetic Gate – THRUSCAN SX

• International regulations (Class NILECJ-0601 L1-5/IP44/EN60950!) In accordance with the CE regulations of the European Union and manufactured according to the ISO 9001:2008 QMS standard.

  Certified according to regulations EN 61000-6-3, EN 61000-6-1 and according to DIRECTIVE 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment)

  Multi-Zone – 9 Panel Detection Zones (Top/Middle/Bottom and Left/Middle/Right)

  Separate zone sensitivity setting for different detection zones

  During normal operation, it displays the ENTRY/EXIT counters and security level on a 64×128 graphic LCD screen without abbreviations, so that security personnel can easily understand.

  Capable of detecting ferrous and non-ferrous metal objects considered dangerous by international security authorities.

  Can detect test objects both individually and in combination

  Displays the location of detected metal objects on both LEFT/RIGHT side panels from bottom to top with continuous LED zone indicators

  It detects all threatening objects, even hidden, camouflaged and/or wrapped. It is impossible for such threatening objects to pass through the WTMD without triggering an alarm.

  There is no interference between zones and no false alarms

  Homogeneous Magnetic Field – No Dead Spots – Same Detection Ability from Bottom to Top

  Detects metals regardless of their orientation

  20 sensitivity levels, 246 adjustable sensitivity steps in each,

  NILECJ Standard preset sensitivity program, 7 preset international security programs

  Automatic frequency selection function

  Metal density-mass estimation with signal strength indication on a 10-level VU meter with green, yellow, red LEDs allows for easy vision from a distance.

  Automatic calibration (Automatically calibrates to ambient conditions) No setting changes required when moving and/or bringing new magnetic objects nearby

  Human health-friendly VLF very low frequency technology, does not affect pacemakers, pregnant women and magnetic media

  Two-tone green/red LED traffic allows for easy visibility from a distance of 60 people/minute and LED alarm indicators on the side panels

  Superior separation and precise identification with graphical zone identification on the control unit's wide 64×128 GLCD display

  Special menu for displaying environmental magnetic interference

  10 adjustable sound tones with 10 volume levels (also mute) and

  adjustable alarm duration

  IR protection function allowing false alarm-free operation/Continuous detection mode option enabled

  Protection level IP 44 – IP 65 Optional (EN 60529)

  Five-digit entry/exit and traffic counter (can be made invisible) 

  Operation without interference from other electronic devices 

  It does not affect other electronic devices. Necessary filtering precautions have been taken.

  Four-digit digital postal lock code with changeability and mechanical lock

  Automatic fault display function on LCD screen with continuous self-checking of key parameters. (BITE – Built-in Test Equipment) 

  Reload factory settings with the push of a button

  Easy programming and display via high-resolution graphic LCD (liquid crystal display)

  4 Menu Languages, Standard menu in English, German, Spanish and Turkish

  Relay output for CCTV recording, photo recording, turnstile control, etc. 

  Built-in uninterruptible power supply (UPS) that allows 2 hours of operation without power

  Battery on/off function allows operation without power

  Easy assembly and installation, takes an average of 15 minutes

  Male/female socket connector design

  Built for 24/7 continuous operation

  Clear passage width 74 cm and clear passage height 200 cm

  Interference-free operation at medium-level sensitivity of 10 cm at a fixed distance from metals and 200 cm on moving metal objects

  Installation and operation without interference between two detectors at a distance of up to 5 cm

  Audio-visual alarms are audible at a distance of 4 meters

  Microprocessor settings do not change when there is a power failure

  There is no interference with storage media, flash drives, CDs, floppy disks and other electronic devices

  All electronic units (electronic unit, power supply, battery, adapter, etc.) are located within the Equipment. There are no external units.

  Corrosion-resistant metal floor mounting feet for proper assembly and durable use

  Automatic fault indication with continuous self-checking of key parameters. (BITE – Built-in Test Equipment) 

  OPTIONAL, SCADA software controlled, remote data communication and networking of multiple metal detectors. Software for changing settings from a PC. 

  OPTIONAL REAL-TIME VIDEO MODULE that allows recording of anxious visitor images/all visitor images or videos with timestamp on SD card – 30,000 images

  OPTIONAL-IRDA – Remote control unit

  Technical characteristics:

  Ambient temperature:
  -20°C to +70°C

  Operating voltage: 
  70VAC – 270VAC / 50Hz – 60Hz

  Force:
  10W in standby mode – 20W (Alarm)

  Clear passage:
  740x680x2000

  Abroad:
  850x680x2200mm

  
  Packaging dimensions (W x L x H):

  Box 1:
  81 x 235 x 21 cm. 

  Box 2: 
  43 x 81 x 27 cm.

  Gross weight:
  79 kilos

  Net weight:
  61 kilos